EU Declarations of Conformity
In this section it is possible to download the Hamilton EU Declarations of Conformity regarding the CE mark. The CE mark refers to compliance with EU directives such as those for RoHS, EMC, RED, Low Voltage and ATEX. It is similar to the FCC Declaration of Conformity used on certain electronic devices sold in the United States.
Certificates for Products Intended for Use in Potentially Explosive Atmospheres
In this section it is possible to download the ATEX and IECEx certificates appling to specific Hamilton product families. The ATEX is an EU directive requiring equipment, intended for use in potentially explosive atmospheres, to be designed and manufactured to minimize the occurrence and limit the severity of accidental explosions. The IECEx certificates for equipment to be used in EX areas (e.g. "explosive atmospheres" or "hazardous locations"), are released by the International Electrochemical Commission (IEC) and they are recognized worldwide.
Declarations of Quality for Sensors and Armatures
In this section it is possible to download the Declarations of Quality (DoQ) for Hamilton Process Analytics' products. View an example DoQ here.
In order to download the DoQs, the product reference - part number (Example: 243666-111) and the serial number - SN (Example 1178). Those numbers can be found either directly on on the product or on the packaging label. The DoQ confirms that the product has passed Hamilton quality controls.
BSE / TSE (Animal Origin) and Jatropha Statement
In this section it is possible to download Hamilton's statement for Bovine Spongiform Encephalopathy (BSE), Transmissible Spongiform Encephalopathy (TSE), and Jatropha compliance. This document covers not only Process Analytics products but also includes Hamilton Laboratory Products, and Automated Liquid Handling.
Material Specification - Declaration of Compliance with the Order EN 10204-2.1
In this section it is possible to download the Hamilton Declaration of Compliance with the Order EN 10204-2.1. Those are material specifications showing that the materials of the wetted parts fulfill, i.e. surface quality, USP class VI tests, etc.
Please note that some products like VisiFerm DO, VisiPro DO, OxyFerm FDA and OxyGold B and G consist of a sensor body and a membrane / cap. Due to the fact that the membranes / caps can be changed the material specifications of sensor body and membrane / cap are separated. As a consequence for these products both specifications are required.
Certificates for Stainless Steel Material according the Order EN 10204-3.1.B
In this section it is possible to download the raw material test certificate according to EN 10204, 3.1.B. In order to download the certificate, the heat number is required. This number can be found on most product's labeling or engraved on the steel part itself. An example of a material test certificate can be seen here.
Certificates of Quality for Calibration Solutions
In this section it is possible to download the Declaration of Quality (DoQ) as well as the (DAkkS) calibration test certificate for each calibration solution.
View an example of a pH buffer DoQ document here.
View an example of a DAkkS calibration test certificate here.
Input the Buffer Solution LOT number, WO number, or the filling LOT number which can be found on the buffer bottle. These numbers can be found on the labeling of each buffer solutions bottle.
NOTE - The filling LOT number will retrieve both the Hamilton Certificate of Quality and page one of the DKD certificate (Example 111003017). The buffer solution LOT numbers are seven to nine digit numbers and will only retrieve the complete DAkkS certificate. A prefix "DKD" is needed for the lot number (Example: DKD111108433).